Changsha Huayi Technology Co., Ltd
Changsha Huayi Technology Co., Ltd. OUR PURPOSE IS CREATE VALUE FOR YOU! OUR PHILOSOPHY IS FOCUS LEADS TO TOPS! THE WORLD IS SO BIG, WE WANT TO SEE!
Add to Cart
| Safety instructions |
| Please read this manual carefully before using the wireless remote control system. The manual is applicable to the safety of the wireless remote control system Installation, commissioning and maintenance. |
| Application |
| ★ Wireless remote control system is used to control the machine and data transmission, please follow the occupational safety instructions when using. |
| ★ Do not use the wireless remote control system in areas with explosion risks. |
| Starting remote control system |
| 1. Put the charged battery into the battery slot on the back of the transmitter; |
| 2. Release the emergency stop switch; |
| 3. Turn on the power switch, the transmitter will make a “di” sound when it is turned on; |
| 4. Connect the power terminal of the receiver to the 12-36V DC power supply; |
| 5. After the transmitter and receiver are connected to the signal, the wireless communication indicator light of the receiver is steady on. |
| Batteries and chargers |
| Battery |
| The actual capacity of the battery depends on the delivery time, service time and ambient temperature, and will decrease with the increase of service times. The battery capacity will decrease rapidly when the operating temperature is lower than 0℃or higher than 40℃. |
| Notes: |
| ★ For the battery stored for more than 3 months, please fully fill before using, three to five times after charging the battery capacity reach to Optimum |
| ★ Please charge the battery in the range of 0-40℃ and store the battery at normal temperature. |
| Rational use of batteries, charging times more than 300. |
| Battery charger |
| According to customer demand, the battery charger can be divided into AC and DC charger: |
| Three LED indicator lights indicates the actual charging state of the battery: |
| ★ Green LED on: Charging is complete. |
| ★ Orange LED on: charging is underway |
| ★ Red LED on: The battery has been deeply discharged or the battery has been damaged. |
|
|
|---|
| Technical Parameters | |
| Operating voltage | 100-240VAC 10-30VDC |
| Charging time | 2-3h |
| Operating temperature | 10-40℃ |
Model Number: Instead of HBC
Place of Origin: China
Standby Time: 20 Hours
Communication Distance: Greater Than 150 Meters
Operating Frequency: 433-490MHz
Functions: Start/Stop, Forward/Reverse, Emergency Stop, etc.
Housing Material: PA6+GF30
Key Words: Wireless Remote for CIFA concrete pump Sany Concrete Pump, Zoomlion Concrete Pump Remote Controller