Product Description:
Can produce all kinds of customized industrial remote control, can be used for pumping machinery, high altitude machinery, lifting machinery, port machinery, coal mining machinery and other kinds of special industrial applications. Remote control category: handheld and strap, 1, handheld remote control, twelve buttons, with 1.35 inch display, 2, strap, large size and small size two, can be installed linear handle, universal handle, button switch and button, can choose 2.42 inch, 3.5 inch, 4.3 inch screen. 3, receiver, can choose voltage and current type input and output, can be compatible with 232,485, can, modbus and other bus output
Without display screen | 1. The transmitter and receiver are normally powered on, the boom handle is in the middle position, and the communication is normal: 2. Press the “emergency stop” button, then press the "Start” button once, and press the button "Start + Flame out" on the side of the button of "Displacement +" at the same time. 3. After the button is effective, the transmitter is in the switching mode. Press the side button to select the model, and the "left swing cylinder" key will select Sany, the indicator light flashes red once, green once,"Right swing cylinder" key selects Zoomlion, the indicator light flashes red once, green twice; "Flame out" key select Xugong, the indicator light flashes red once, green three times; If the "Start" key select Foton, the indicator light flashes red once and green four times. With display screen | With display screen | | 1. The transmitter and receiver are normally powered on, the boom handle is in the middle position, and the communication is normal; | | 2. On any interface of the remote control screen, press the “emergency stop” button and press the four combination keys on the right side: “Start + ringing + automatic arm extension + automatic arm extension” to enter the model selection interface; | | 3, In the model selection interface, press the "swing cylinder" key to select the type. Press the "Menu" key to confirm the type. Gray displays setting succeeded. | | Universal remote control boom current setting instructions | | Setting current refers to the type of pump that sets the current of the boom through the receiver PWM pulse | | Setting method | | Without display screen | | 1. The transmitter and receiver are normally powered on, the boom handle is in the middle position, and the communication is normal: | | 2. Press the combination key, "Left swing + right swing + Start", enter the boom adjustment mode, and the LED indicators of the transmitter flash alternately: | | 3. Push the boom handles that needs to be adjusted up and down, press the "left swing cylinder" key to increase the current, "right swing cylinder" key to reduce the current, and press the "horn" key to save the Settings. | | With display screen | | 1. The transmitter and receiver are normally powered on, the boom handle is in the middle position, and the communication is normal; | | 2, Press "Menu" to enter the diagnostic-debugging interface, press the combination key "swing cylinder + brightness adjustment + start + ringing", the display screen will display "adjusting boom .......". | | 3. Push the boom handles that needs to be adjusted up and down, press the "Start" key to increase the current, the "ringing" key to reduce the current, and press the "swing cylinder " key to save the Settings. | | Note: Push the boom handle to the bottom to adjust the maximum value, slightly push the boom handle to the minimum value of action adjustment | | Indicator light | | Transmitter: Turn on the transmitter, the indicator light of the transmitter flashes twice and goes off, the transmitter is not connected with the receiver Signal: The transmitter flashes and disappears, the transmitter and the receiver are connected with the signal; Transmitter red light is blinking. Battery is dead. | | Receiver: Receiver panel four lights, "Power", "Emergency Stop", Wireless communication ", bus data ". | |
Customization:
Concrete Pump Remote Customization Service
Brand Name: Construction Machinery
Model Number: Instead of HBC
Place of Origin: China
Standby Time: 20 Hours
Communication Distance: Greater Than 150 Meters
Operating Frequency: 433-490MHz
Functions: Start/Stop, Forward/Reverse, Emergency Stop, etc.
Housing Material: PA6+GF30
Key Words: Wireless Remote for CIFA concrete pump Sany Concrete Pump, Zoomlion Concrete Pump Remote Controller
| The power | The power adapter connects to the 12-32VDC power supply, and the indicator is on |
| Emergency stop | The receiver power is energized, not connected to the transmitter signal, indicator light on |
| The wireless communication | The receiver is energized, connected with the transmitter signal, and the indicator light on |
| The bus data | The receiver is energized, the boom handle is pushed, and the indicator light on |
